On the Pacific Coast, Island Tug & Barge Ltd., Vancouver, B.C., continues to make headway in a $4,000,000 program of new construction initiated two years ago. The company's most recent addition to the fleet, Island King, incorporates the latest in technical advances - a statement which seems to hold true whenever a new tug is launched these days. The fact is that the Island King represents a further advance in tug construction.
As with all of Island's recent tugs, the 3,600-hp King is the result of several years of planning and testing. A model of her hull underwent tank testing in the Netherlands Ship Model Basin at Wageningen, a procedure which is becoming standard and essential in the tugboat business as in other naval construction.
The combination of a 20-cylinder, GM Model 20-645 E-5 engine with a Kort Nozzle system utilizing a fixed propeller 10 feet 6 inches in diameter puts the King in the top class of powerful tugboats operating on the West Coast. The tug has a maximum bollard pull of 100,000 pounds.
The Island King has an overall length of 131 feet 9 inches, a molded breadth of 32 feet, a molded depth of 17 feet 7 inches, and displaces 850 tons.
The tug was designed by Robert Allan Ltd., Vancouver naval architects. Builders were Star Shipyard (Mercers) Ltd. She will be used primarily for towing the largest of the offshore barges operating along the Pacific Coast, but has the power and the equipment to handle units in the 20,000-ton class. Deepsea salvage will undoubtedly be included among her duties.
An inspection of the Island King carries the mind beyond impersonal statistics. Her overall appearance is sleek, solid and compact, with the low silhouette typical of the latest additions to Island's fleet. A survey of interior fittings and accommodation reveals an unusual degree of comfort and good planning. There are individual cabins for crew members, all located above the main deck, all panelled in wood grain plastic laminate and fitted with deep, floor-to-ceiling lockers. Master and mate occupy their own separate quarters above the fo'c'sle deck, and the chief engineer's cabin is at the engine room entrance on the main deck, starboard side.
The spacious, all-electric galley ushers in a new era for tugboat cooks long resigned to preparing full course meals in cramped quarters. Adjoining the galley is a combination mess and recreation lounge trimmed in oak wood grain and brightened with chairs and seats upholstered in blue leatherette. A concealed stereo unit pipes taped music into this area on off-duty hours. This area as well as crew's quarters, bridge, and engine room control booth are air conditioned.
The engine room houses one of the first marine applications of the 20-cylinder version of the popular GM 645 series. This is a turbocharged version rated at 3,600 bhp at 900 rpm. Speed and bollard pull trials performed last November produced a running speed of 14.5 knots and a bollard pull of 100,000 pounds - remarkably close to the performance predicted by the designer.
The King's deck machinery centers on a single drum, hydraulically powered winch carrying 3,000 feet of 2.125-inch diameter steel-cored cable. All deck machinery including the anchor windlass and the spare towline reel located in the aft hold is driven by high pressure hydraulics powered by a Detroit Model 6/71 diesel engine.
Duplicate steering and engine controls are located in a plexiglass sheltered console at the aft end of the fo'c'sle deck. In this same console are controls governing the brake, clutch and speed levers for the towing winch. From this position as well as from the wheelhouse the steering Kort Nozzle can be swung from hardover to hardover in 15 seconds.
Steering controls include wheel steering by telemotor from the wheelhouse center, and non-follow up electric steering levers at other stations. A Sperry gyro-controlled autopilot system takes over from the helmsman whenever required.
In the engine room, main and auxiliary machinery installation and alarm panels and the main switchboard are enclosed in a sound-insulated control booth at the forward, starboard end of the machinery space.
The tug has a seawater evaporator producing 20 gallons of fresh water an hour, utilizing the heat from the water jacket of the main engine's fresh-water cooling system.
The Island King has been designed to go 50 days without refueling. Her size, power and complete range of navigation and control equipment enable her to go anywhere on the high seas, although her main duties will employ her along the Pacific Coast. At present she is dividing her time between the Island Yarder, the company's 11,000-ton self-loading, self-dumping log barge, and the equally large limerock barges, Island Importer and Island Exporter.
Island Tug's construction program does not stop with Island King. On the ways at the moment is another tug as yet unnamed. Her design will incorporate technical changes unique for her class. Island King, however, will be a true monarch in Island Tug's fleet for years to come.